Monthly Archives: May 2016

Swimming pool water

Preventing Cryptosporidium contamination of swimming pool water

Poor hygiene practices mean that most swimmers retain some faeces on their body. This can be rinsed into the pool while swimming.

To help prevent contamination of pool water, you should:

  • Never swim in a pool if you have diarrhoea or if you have had diarrhoea in the past two weeks.
  • Shower and wash thoroughly with soap (especially your bottom) before entering the pool.
  • Wash your hands with soap after going to the toilet or changing a nappy.
  • Change nappies in nappy change areas only.
  • Avoid swallowing pool water.

Cryptosporidium is a parasite

Cryptosporidium is a tough germ that can be spread when recently infected swimmers contaminate the water with tiny amounts of the germ present on their body. Cryptosporidiosis (crypto) is the disease caused by the germ and possible sources of contamination include someone who has recently had the illness, domestic animals such as pets, and farm animals such as cattle.

Cryptosporidium lives in the bowel and is found in the faeces (poo) of infected humans. The germ is normally spread through poor hygiene (such as not washing), Aquatic Management companies, usually by ingestion of contaminated foods or water.

Outbreaks of crypto associated with pools occur when swimmers accidentally swallow pool water contaminated with the germ.

Cryptosporidiosis is very contagious

One person infected with crypto can pass enough germs in a single visit to contaminate a large swimming pool & Pool Management jobs. The germs are highly resistant to chlorine, the usual form of pool disinfection. Swallowing as few as two of the grems can lead to infection.

Preventing pool contamination by babies and toddlers & Swimming Pool staffing.

Babies and toddlers are still training to control their bowel movements, so parents and supervisors should be extra careful to prevent faecal accidents and contamination of pool water.

To prevent faecal contamination of pool water:

  • Keep an eye on your children at all times.
  • Take children on frequent toilet breaks every hour or check nappies every 30–60 minutes.
  • Change nappies in nappy change areas only.
  • Do not change nappies by the poolside.
  • Non-toilet trained children should wear tight-fitting waterproof nappies.
  • Report any faecal accidents to swimming pool staff.

Things to remember

  • You can help keep your pool clean by following simple steps to healthy swimming.
  • Do not swim if you have diarrhoea.
  • Cryptosporidiosis is highly contagious. Do not swim for 14 days after diarrhoea stops.
  • If you have diarrhoea and are unsure of the cause, do not swim for 14 days until after diarrhoea stops.
  • Notify the pool manager if you become sick after swimming at a public pool.

PMI is a professional full service Pool Management Group that provides staffing solutions for Aquatic Management companies, water parks, community pools and city pools. We manage facilities in multiple states and can provide you with multiple solutions for your facility.

Advertisements

Aquatic management services

Swimming is a popular low-impact activity that is a great way to stay active and maintain good health and fitness. Swimmers should be aware that while pool managers treat and maintain water quality in swimming pools to keep swimming pools clean, there are simple things we can all do to help keep the pool clean. With good hygiene and healthy swimming practices, you can help prevent contamination and swimming pool related illnesses & Aquatic Management companies.

Most pools have treatment systems in place to kill germs. Depending on the type of germ and how long it takes for the germ to be killed, sometimes visitors can get sick when they come in contact or swallow small amounts of contaminated water & Pool Management jobs.

Chlorine kills germs over time

Chlorine is able to kill most germs, but it doesn’t happen straight away. Some germs such as Cryptosporidiumcan live in pool water for days. Without your help, even the best maintained pools can spread germs.

Keep germs out of pool water

We all have germs on our bodies which can wash off and contaminate the pool water. We are more likely to carry germs that can make others sick when we are not feeling well.

For example, if you have a stomach upset and diarrhoea, there are thousands of germs in your faeces (poo) and traces on your bottom. These germs wash off and contaminate the pool when you go swimming & Swimming Pool staffing.

To keep germs out of the pool, you must not go swimming when you have diarrhoea. If you have been diagnosed with an infection called cryptosporidiosis (crypto), then you must not swim for 14 days after the diarrhoea stops. If you have diarrhoea and are unsure of the cause, do not swim for 14 days after the diarrhoea stops.

How long to stay out of the pool

If you have any of the listed infections, you need to stay out of swimming pools for the recommended times, which are:

  • Chickenpox – avoid swimming for seven days after the rash appears.
  • Cryptosporidiosis (crypto) – do not swim for 14 days after diarrhoea stops.
  • Tinea corporis (athletes foot) – do not swim until a day after treatment is started.

Cryptosporidium is a parasite

Cryptosporidium is a tough germ that can be spread when recently infected swimmers contaminate the water with tiny amounts of the germ present on their body. Cryptosporidiosis (crypto) is the disease caused by the germ and possible sources of contamination include someone who has recently had the illness, domestic animals such as pets, and farm animals such as cattle.

PMI is a professional full service Pool Management Group that provides staffing solutions for Aquatic Management companies, water parks, community pools and city pools. We manage facilities in multiple states and can provide you with multiple solutions for your facility.

Swim lessons by PMI

PMI will place the right lifeguard according to your pools specific needs. We only recruit and hire the best so you can relax and enjoy your summer.

Certified and affiliated with National Associations such as; CAI, (Community Association Institute) CMAA, (Club Managers Association of America) NRPA, (National Park and Rec. Association) and NPMA (National Pool Management Association).

Automated computerized timekeeping and staff attendance system.

Highly trained national and international certified lifeguards. Coupled with our own training and written review examinations.

Full compliance with local, state and federal codes including OSHA regulations of Blood Born Pathogens and MSDS chemical data sheets.

A full range of pool related programs are available including: Swim lessons, personal training water aerobics, and water fitness programs. Excellent Workers Compensation coverage. We carry a $1,000,000 general liability insurance program coupled with professional and punitive damages for your protection.

Lifeguards Job Description:

A lifeguard is responsible for assisting in swimmers’ safety and well being in swimming environments such as public pools and beaches. Lifeguards hold a physical job that requires the ability to swim and perform rescues for individuals in distress. Proper knowledge of AED, CPR and similar life-saving techniques is needed; proper first aid skills are mandatory, as is lifeguard certification. The lifeguard’s environment is predominantly outdoors with the exception of indoor swimming pools. Coworkers are typically fellow lifeguards; aside from coworkers, lifeguards participate in substantial social interaction with beach- and pool goers. Their hours vary depending on their facility’s hours of operation and available shifts.

A lifeguards must ensure that all beach-or pool goers are abiding by the rules. Lifeguards must also be knowledgeable about – and able to share – information on current water conditions. They must be responsive to any emergencies that may arise, such as someone in need of first aid or a potential drowning victim. Additionally, they look out for unsafe conditions in the water, such as the presence of dangerous objects.

A lifeguarding must renew their certification each time it expires. They are also expected to remain in sufficient physical shape to perform their duties. Good interpersonal skills and the ability to interact well with pool- and beach goers are needed as well. Lifeguard salary is mostly based on what the job can pay and very little to do with experience.

Lifeguard Tasks

o             Notify the pool, spa, and sauna maintenance operator to ensure regulations are maintained.

o             Respond to emergency situations in the water or surrounding areas.

o             Administer first aid and contact emergency medical personnel in case of serious injury.

o             Maintain a safe swimming environment and enforce all policies, procedures and regulations.

PMI is a professional full service Pool Management jobs that provides staffing solutions for Aquatic Management companies, water parks, community pools and city pools. We manage facilities in multiple states and can provide you with multiple solutions for your facility.

 

Aquatic facility water parks

Pool Management Inc./PMI is a professional full service pool management company that provides staffing solutions for aquatics centers, water parks, community pools and city pools. We manage facilities in multiple states and can provide you with multiple solutions for your facility. We also offer new facility design and build options or renovations and upgrades. Does your facility simply need weekly chemicals and maintenance? We offer that as well. Aquatic Management companies Pool Management Inc./PMI is com…

PMI will provide your aquatic facility with professional water safety. PMI will place the right lifeguard according to your pools specific needs. We only recruit and hire the best so you can relax and enjoy your summer. Certified and affiliated with National Associations such as; CAI, (Community Association Institute) CMAA, (Club Managers Association of America) NRPA, (National Park and Rec. Association) and NPMA (National Pool Management Association). Automated computerized timekeeping and sta…

Swimming Pool Management across the country. Pool Management, Inc. has over 20 successful years in the swimming pool management industry. We have have been providing City’s, Country Clubs, Communities and Home Owner Associations with America’s finest Lifeguards, Aquatics Directors, Swim and water instructors. We assemble a team for your facility based on your criteria. We also have pool construction division that has been building new pools and renovating existing pools for over 20 years….

Pool Management, Inc. has over 20 successful years in the swimming pool management industry. We have have been providing City’s, Country Clubs, Communities and Home Owner Associations with America’s finest Lifeguards, Aquatics Directors, Swim and water instructors. We assemble a team for your facility based on your criteria. We also have pool construction division that has been building new pools and renovating existing pools for over 20 years. Whether it be Pool or Deck resurfacing, New shade structure installation, Salt System conversions, or pump room repair and design, Pool Management, Inc. has the resources and experience for all your facility’s needs.

Full compliance with local, state and federal codes including OSHA regulations of Blood Born Pathogens and MSDS chemical data sheets.

A full range of pool related programs are available including: Swim lessons, personal training water aerobics, and water fitness programs. Excellent Workers Compensation coverage. We carry a $1,000,000 general liability insurance program coupled with professional and punitive damages for your protection.

Certified and affiliated with National Associations such as; CAI, (Community Association Institute) CMAA, (Club Managers Association of America) NRPA, (National Park and Rec. Association) and NPMA (National Pool Management Association).

PMI is a professional full service Pool Management jobs that provides staffing solutions for Aquatic Management companies, water parks, community pools and city pools. We manage facilities in multiple states and can provide you with multiple solutions for your facility.

Pool water circulation

To keep your pool’s water sparkling clean, a few basic maintenance steps are required. Find information on the usage of products, care and how to test your water for easy pool maintenance in this section.

Circulation – The center of the circulation system is the pump. It moves water from the pool and sends it through the filter for removal of any dust, dirt and debris prior to sending it back to the pool.

How long should you run your pump? Piping size, pool size, swimmer load and the actual pump size all play a role in determining how long you should run your pump. For the proper time consult your pool professional. They can determine, based upon your specific pool, the proper amount of time required to keep your pool clear and clean. A good rule of thumb is to run your pump about 1 hour for every 10º of temperature.

The Filtration System – The job of the filtration system is to remove any undissolved dirt and debris from the pool water. While the skimmer basket and the hair and lint basket in the pump all play a role in the filtering of the pool water, Swimming Pool Management, the primary element of the system is the filter itself. If you backwash sand or DE filters too often, the filter cannot reach its cleaning potential and you are wasting water. Most filters require backwashing when the pressure gauge rises 8-10 psi from clean. Consult your pool professional to understand the role that the skimmer and pump basket play in keeping your pool clean& Swimming Pool staffing. Always consult your owner’s manual for specifics related to the type of filter you have.

Filter Types

There are three types of filters that are used in swimming pools to remove dirt and debris that enter the water through swimmers and the environment.

  1. Sand
  2. Cartridge
  3. Diatomaceous Earth (DE)
  • Sand Filters – Dirt is removed from a sand filter by “backwashing” or reversing the water flow. The filter should be backwashed when the pressure gauge indicates a 7-10 lbs. increase over normal operating pressure. This is the pressure indicated on the pressure gauge when the filter is completely clean. Sand filters are more efficient when they are slightly dirty; consequently they should only be backwashed when required by the increase in pressure. Sand filters should be cleaned at least every season with a filter cleaner, Lifeguards & Lifeguarding.
  • Cartridge Filters – Dirt needs to be removed from a cartridge filter when the pressure gauge indicates an increase of 7-10 lbs. over normal operation pressure. Remove the cartridge(s) from the filter and hose off all loose dirt and debris. Then soak the element(s) in filter cleaner for at least 12 hours. This will remove all oils and greases imbedded in the filter element. After soaking, remove the cartridge(s) and rinse thoroughly with fresh water, Pool Management jobs. Peak filter efficiency is achieved if you allow the filter element(s) to dry prior to reinstalling in the filter. To avoid any “down time” for the circulation or filtration systems, it is advisable to purchase a second set of cartridge elements so they may be interchanged on a regular basis with the first set & Aquatic Management.
  • Diatomaceous Earth Filters – Like sand, the DE filter is cleaned by backwashing the filter when pressure increases 7-10 lbs. However, once the filter has been backwashed, new DE must be added to coat the grids in the filter. This is accomplished by pouring DE through the skimmer. To cut oils and other natural oil build-up, DE filter grids should be cleaned at least once every season using filter cleaner. Also, at least once a year the entire DE filter should be disassembled and cleaned thoroughly as well as being inspected for tears or rips in the grids.

PMI is a professional full service Pool Management jobs that provides staffing solutions for Aquatic Management companies water parks, community pools and city pools. We manage facilities in multiple states and can provide you with multiple solutions for your facility.

 

 

Pool water cleaning process

To keep your pool’s water sparkling clean, a few basic maintenance steps are required. Find information on the usage of products, care and how to test your water for easy pool maintenance in this section.

Testing Your Pool – Testing your pool 2-3 times a week during the summer and once a week during the winter is important to maintain adequate water balance and sanitizer levels plus to insure swimmer comfort. Test strips are a quick way to test the pool for adequate sanitizer levels as well as pH and total alkalinity. Proper testing also ensures that calcium levels are maintained and that there are no metals present in the pool water. These tests can be completed by you or your pool professional. In order to prevent scaling or corrosive action and to achieve maximum swimmer comfort, Pool Management jobs, the pool water should be balanced.

Balancing pH – pH is the measure of acid and base in the pool water. The pH of the pool should be tested and adjusted, if necessary, on a weekly basis. If the pH of the pool water drifts to the acid side of the scale, corrosion of pool surfaces and equipment can occur. If the pH of the pool water drifts to the base side – scaling, deposits, and cloudy water can occur. Use a pH increaser to increase the pH of the pool. At 8.5, chlorine is only about 10% active. At 7.0, chlorine is about 73% active. If you maintain pH around 7.5, the chlorine will be 50-60% active. Keeping the pH in check will allow you to use the full potential of the chlorine that is already in the pool. To lower the pH of the pool, use a pH decreaser. Follow the label directions for the proper amount of the products to add based upon test results and pool size & Swimming Pool Management. Take a sample of water to your pool professional dealer every 2-3 weeks for complete test and analysis.

Calcium Hardness – Calcium Hardness is the amount of dissolved calcium in the pool water. Low calcium hardness levels can cause plaster finish etching and shorten the life of vinyl liners. High calcium levels can result in calcium deposits on the pool surfaces as well as equipment. The proper range for calcium hardness in pool water is 200- 250 ppm (parts per million) for concrete pools and 175-225 ppm for vinyl pools. Your pool professional can advise you of the best method for treating your pool & Swimming Pool staffing if you encounter high calcium hardness. If tests indicate that you have extremely high calcium levels in your pool, take a sample of your fill water (water used to fill the pool) to your pool professional for analysis as well.

Total Alkalinity – To prevent the pH varying up and down, the proper amount of acid buffers, or total alkalinity, must be maintained in the pool. The pool should be tested weekly with a total alkalinity of 1 20-150 ppm (parts per million) maintained. Low total alkalinity can not only result in pH bounce and fluctuations, but corrosiveness and the possibility of staining increase. High total alkalinity also can cause the pH to fluctuate as well as cause cloudy pools along with possible scaling. To lower total alkalinity, follow the directions from your pool professional. To raise total alkalinity, an alkalinity booster is recommended Lifeguards & Lifeguarding.

Metals – There should not be any metals present in your swimming pool water. Metals can cause staining in the pool and cause the pool to turn colors. The most common types of metals that appear in pool water are copper, iron, and manganese. If metals are present in the pool, a stain and scale remover should be used on a regular basis to prevent staining. You should determine the source of the metals and remove if possible.

Sanitize with Chlorine – Stabilized chlorine products sanitize your pool water and kill bacteria. Stabilized chlorine products are protected from sun light degradation and are an ideal means to keep your pool clear and clean & Aquatic Management.

Sanitize with Bromine – You may want to use bromine instead of chlorine to sanitize your pool. Bromine tablets provide a reliable method for killing bacteria and keeping your pool clear and clean. To utilize bromine effectively, an automatic brominator should be installed in your pool.

Shock – Shocking the pool on a regular basis is an important element in keeping the pool clear and clean. Swimmers and the environment add waste to the pool that must be eliminated on a regular basis in order to prevent problems such as algae and cloudy water.

Algaecide – Preventing algae is the key to an enjoyable pool. Algaecides act as a backup to your normal sanitization program and prevent algae from starting and growing in the pool. Algaecide should be added after every shock treatment.

PMI is a professional full service Pool Management jobs that provides staffing solutions for Aquatic Management companies water parks, community pools and city pools. We manage facilities in multiple states and can provide you with multiple solutions for your facility.